Hmoe > Automatic Planer & Moulder > Planer
SK-650

Double Surface Planer with Multiple Rip Saw

  Perfectly suited for producing square wood in material preparation factories and sawmills.
  Combines the functions of a planer and a multiple rip saw, saving time and labor.

  • Patented top and bottom self-aligning feed rollers ensure smoother feeding
  • Patented top and bottom knife replacement
  • Patented saw arbor design eliminates the need to dismantle bearings, making saw blade changing easier
  • Extremely high precision saw arbor
  • Faster rubber roller replacement.

INNOVATIVE CUTTERHEAD REMOVAL DESIGN

When replacing the knives,the cutterhead can be easily removed by pulling it out directly without having to dismantle the bell , dust hood or bearings.

PREFECT SPEED CORRELATION OF TOP AND BOTTOM ROLLERS

Eliminates the conventional chain drive,the machine employs universal shafts for transmission with synchronized feed speed between upper and lower feed rollers.The outstanding transmission system may effectively solve the reeding problem for moisturized wood during heavy duty cutting.

A IR LOADED PRESSURE TOLLERS

Air loaded pressure rollers ensure a smooth feed.

FAST SAWBLADE REPLACEMENT

The sawblade can be easily replaced by simply loosening a screw and without having dismantle and of bearings. The side arbor ensures added convenience for saw blade replacement and calibration.

FAST SECTIONAL RUBBER ROLLER REPLACEMENT

The sectional outfeed rubber rollers can be easily replaced in the event of wear. Once the holding bearing is dismantled, the rollers can be easily removed from the front.

PRECISION ELEVATION OF FEEDING MACHANISM

The feeding mechanism elevation is digitally control, It can be power operated for accurate, clear and easy adjustment.

Max. width of planning 650mm
Max, ripping of planning 630mm
Thickness of cut 12-150mm
Min.length of cut 420mm
Bottom spindle speed 5300 RPM
Top spindle speed 5300 RPM
Saw spindle speed 2600 RPM
Sawblade diameter (Cut thickness) Ø355(12-100) Ø405(12-120) Ø455(12-150)MM
Saw spindle diameter Ø 65MM
Sleeve diameter ( Sawblade bore diameter) Ø 80MM
Sawblade keyway 20 MM(W) X2
Sawblade between keyways 90MM
Spacing collar diameter (i.D./OD.) Ø 80MM/100MM
Feed speed(Variable) 7-28 M/MIN
Bottom spindle drive motor 20 HP (30 HP, 40 HP, opt)
Top Spindle drive motor 30 HP (30 HP, 50 HP, opt)
Saw spindle motor 50 HP (75 HP, 100 HP, opt)
Feed drive motor 5 HP
Pressure roll elevation motor 2 HP
Saw elevations motor 1/2 HP
Dust hood outlet diameter Ø125mm(5”)x2, Ø150mm(6”)x4
Table height from floor 800mm
Machine size (LxWxH) 3800 x 1800 x 1800mm
Packing size (LxWxH) 4020 x 2200 x 2250mm
Net weight (Approx) 4200 kgs
Gross weight (Approx) 4600 kgs